More info on new Lexmark A4 color laser MFPs, the X792 series:
o Base MSRP of $4499, fully loaded $6349
o Letter size paper maximum
o Base model footprint of 32.5”H x 22”W x 20”D (161lbs.)
o Made by Fuji (who is primary supplier of Xerox branded products)
o 4 tandem OPC drum design
o Polymerized toner
o 50ppm top speed color or b/w
o 8.5 second first color copy out time
o 10.2” full color LCD touchscreen
Can provide audible feedback
o Analog fax board with PC fax
o 600x600dpi scan or copy
1200x1200dpi printing (does not offer true 8 bits per pixel)
Advertised as offering “4800 Color Quality” with interpolation
o Document feeder holds up to 75 originals
scan speed of 49opm
can scan both sides of original at same time
o Auto duplex standard
o Card copy mode
o Comes standard with single 550 sheet paper drawer and 100 sheet stack bypass
Supports banner printing
Maximum paper supply of 2,650 sheets
Supports some glossy, card stock, labels and envelope stocks
o Choice of 6K yield of 20K yield toner cartridges
Based on 5% coverage per page per color
o 150K/month max duty cycle (recommended max of 17K/month)
o “Eco-Mode” features reduces toner consumption (but lowers print quality)
o Finishing options include:
Five bin mail box
Offset stacker
50 sheet stapling finisher
• Optional hole punch
o Built-in print controller
Actual maker unknown
USB & 10/100BaseT ports
• Optional 1000BaseT gigabit Ethernet
• USB port in front of device for print from and scan to features
1.2GHz processor
Hard drive (with data encryption, data wipe, and audit log)
1GB RAM standard (options increase to 2GB RAM maximum)
PCL & PostScript print drivers standard
• Optional IPDS, forms and bar code printing
Optional proximity card reader
Scan to email/LDAP/FTP/folder (maximum of 30 folder destinations)
Advertised as offering “Pantone calibration” (but does not offer optional EFI Fiery or an external toner hue or density measurement device)
go here for the first "Spec Review" on the Lexmark X792
-=Good Selling=-
No comments:
Post a Comment